Project Excursion Killer, Part 2
|
The rear four-link trailing-arm suspension was built with 60-inch-long arms that pivot off bushings mounted to the stock GM frame to mount the King 2 1/2-inch-diameter, 16-inch-travel coilover shocks with reservoirs and 400-pound over 500-pound coil springs. To make the world feel flat and smooth, 2 1/2-inch-diameter, 18-inch-travel bypass shocks with reservoirs were added on each side to flatten the bumps better than a Caterpillar steamroller. View Related Article
|
|
|
|