4Wheel & Off-Road Homepage

P24137 Image Large

Prev Next
After the long bracket is secured to the frame, drill a hole into the crossmember for the other end of the bracket to be bolted to. A regular drill motor won&#8217t fit through the bracket from the backside because of a crossmember, so an angle-head drill motor must be used. In our situation, we found a small existing hole that lined up almost perfectly with the bracket, so we drilled the 1/2-inch hole from the front.
Fullsize GM Steering Brace

 After the long bracket is secured to the frame, drill a hole into the crossmember for the other end of the bracket to be bolted to. A regular drill motor won’t fit through the bracket from the backside because of a crossmember, so an angle-head drill motor must be used. In our situation, we found a small existing hole that lined up almost perfectly with the bracket, so we drilled the 1/2-inch hole from the front.  View Related Article