Are Rear Discs Worth It?
Since a caliper has to be able to move to do its job, a flexible brake line is needed between the caliper and the hard line. Standard rubber hoses are normally supplied with the kit, but we chose the optional stainless steel braided lines for their increased abrasion resistance. The hoses are not the normal skinny lines found elsewhere, but genuine DOT-approved lines. The banjo end of the line is attached to the caliper with a special hollow bolt and copper crush washers on each side of the banjo fitting, and is torqued down on the caliper to 25 ft-lb. View Related Article
|
|