1997 Project Ford Ranger - 4Wheel & Off-Road Magazine

The third and final installment of the Ultimate Danger Ranger is finally upon us. What started out as a mild '97 Ford Ranger, has been transformed into an adventure-ready truck that was built in just under five weeks. Using Rock Krawler's YJ coilover conversion up front along with a set of All Pro Off-Road Toyota leaf springs in the rear ("Ultimate Danger Ranger, Part I," Nov. '07), we were able to get our truck clearing the 35-inch BFGoodrich M-Ts without a problem. Once the lift was in place we beefed up the drivetrain with a 5.0:1 Atlas II and stuffed our Ford 8.8 and Dana 30 axles with lunchbox lockers and 4.88 gears ("Ultimate Danger Ranger, Part II," Dec. '07).

Preparing for a 1,600-mile road trip with a truck that has zilch in the way of shakedown time is quite the experience. And with 136k on the old 3.0L engine we decided to give our slow Ranger a little boost with a JET Performance programmer. This not only gave us a little pep in the power department, but allowed us to check and clear any trouble codes that might pop up along the way.

With our Warn 9.5 XP winch bolted down and the Optima red-top battery securely in place, we loaded the truck. If you've ever owned a regular cab truck you know how space can fill up fast, leaving you hunched over the steering wheel in order to stuff that last bag of clothes behind the seat. To combat this problem we tossed on a no-drill bedcover from Stylin' Concepts to keep our junk high and dry. This would keep our two-man team of Feature Editor Ali Mansour and Art Director Alan Huber from feeling like sardines and even gave us a little room to enjoy the A/C when nobody was looking.

With only a few days to go we managed to wrap up all the loose ends, and, other than a little welding mishap on the last day, we would call this trip a success.

We needed a winch and a spot to mount it quick! The Trans4mer from Warn was a great solution to mount up our Warn XP 9.5 winch. As a completely bolt-on winch mount, the Trans4mer is available in multiple configurations that give you a variety of options from bolt-on brushguards to auxiliary-light mounts.
We needed a winch and a spot to mount it quick! The Trans4mer from Warn was a great soluti
Winches are extremely demanding on your vehicle's charging system and can tax your battery to its limits if you're not careful. To make sure we stayed fully charged we used an Optima red-top series battery. The dry-cell technology battery will charge faster and hold charges longer than the stock battery, allowing us to winch without endangering our truck's electrical system.
Winches are extremely demanding on your vehicle's charging system and can tax your battery
With two people onboard and a week's worth of tools, supplies, and camping gear, we were going to need to keep our junk covered. Our savior came in the form of a snap-down bedcover from Stylin' Concepts. We stuffed, stretched, and put the cover through the mill and it never frayed, unsnapped, or let our valuables get soaked in the gooey Texas clay.
With two people onboard and a week's worth of tools, supplies, and camping gear, we were g

The 3.0L is not the most powerful engine Ford ever made, but JET Performance has a programmer to give it a little bit of a boost. Doubling as a code reader, the programmer will allow us to check and diagnose trouble codes if anything should arise, because with 136k miles on the odometer, our '97 is no spring chicken.
The 3.0L is not the most powerful engine Ford ever made, but JET Performance has a program
We went to Ramona Tire and got our 35-inch BFGoodrich M-Ts mounted on a set of 15x8 American Racing Teflon-coated wheels. The plus side of the Ranger's 5-on-4.5 pattern is that it opens up a wide variety of tire and wheel combinations since it shares the same bolt pattern as the widely marketed Jeep TJ, XJ, YJ, and ZJ.
We went to Ramona Tire and got our 35-inch BFGoodrich M-Ts mounted on a set of 15x8 Americ
So how did our Danger Ranger fare? Awesome! In fact it was one of the few rigs that didn't break a single drivetrain component the entire trip. Other than a few overheating issues (mainly due to the mud), our truck was virtually problem free until the last day of the trip when a little welding mishap kept the truck from wheeling on the Katemcy rocks. For more information and pictures on the build, check out www.4wheeloffroad.com.
So how did our Danger Ranger fare? Awesome! In fact it was one of the few rigs that didn't

Although most downloaders are as easy as plug and play, our Ranger's PCM needed to be sent off to JET Performance so that they could update our factory data into their system to allow the programmer to upload the proper settings. While JET's Ranger programmers cover a wide spectrum of PCM data, it is still possible that they might need to do the same for yours. Don't sweat it since removing the PCM takes less time than lacing your shoes, and turn-around time is relatively short.

SOURCES
Stylin' Concepts www.stylinconcepts.com	Optima Batteries 5757 N. Green Bay Ave. Milwaukee WI 53201 414-524-1200 www.optimabatteries
Ramona Tire	American Racing 1275 Davis Rd., Suite 300 Elgin IL 60123 8-00/-321-5489 3-10/-635-7806 www.americanracing.com
Warn 5-03/-722-1200 www.warn.com	JET performance
BFGoodrich Tires 877-788-8899 www.bfgoodrichtires.com