Project Fun Buggy Plumbing - Radiator, Exhaust, Air Intake Install
Though there are many supposed "recipes" for radiator size to engine output, the team at ron Davis has found none to be 100 percent correct. For this buggy we went with a 28x19-inch double-pass 3-inch-thick radiator with two 13-inch spal electric puller fans giving an estimated 3,420 cfm combined. The radiator came with the dual fans on the same side as the inlet and outlet, so we moved them to the opposite side and then mounted the radiator at a slight angle in the chassis such that the cool air is pulled down and through the radiator. View Related Article
|
|