4Wheel & Off-Road Homepage

P99715 Image Large

Prev Next
The lower-link brackets are made from 3/16-inch mild steel, 1 1/2-inch 0.120 wall tubing, and heavy-wall 5/8-inch inside diameter DOM tubing. They are located on the frame using holes that had been stamped into the frame at the factory. This ensures that the brackets are mounted in the correct positions.
1979 Ford F-150 - Project Two-By Four, Part 1

 The lower-link brackets are made from 3/16-inch mild steel, 1 1/2-inch 0.120 wall tubing, and heavy-wall 5/8-inch inside diameter DOM tubing. They are located on the frame using holes that had been stamped into the frame at the factory. This ensures that the brackets are mounted in the correct positions.  View Related Article

 

Car Research Guide