Dodge Dakota Quad Cab - Custom Rebuild - 4Wheel & Off-Road Magazine

The first step was to yank out whatever we didn’t need, so out came the stock 4.7L V-8. While a decent motor, it just didn’t supply the big horsepower and torque numbers we were looking for to turn the 39.5-inch Boggers.
The first step was to yank out whatever we didn’t need, so out came the stock 4.7L V-

Next to get ditched was the stock transmission and transfer case. Yanking parts out is fun when you don’t have to use them again. Anything that gets in your way can simply be hit with the gas axe.
Next to get ditched was the stock transmission and transfer case. Yanking parts out is fun
With everything removed that we didn’t need, we were ready to start the real work. Unfortunately, our Mopar Performance engine had not arrived. This meant we had to scramble and find a mock-up motor. Luckily, Dave Smith from Pro Trans happened to have a 440 block and even a spare 727 transmission laying around that he was kind enough to let us borrow. Now, ORU had all the dimensions needed to start making motor mounts, crossmembers, and the like.
With everything removed that we didn’t need, we were ready to start the real work. Un

Our 500 cubic inch Mopar Performance engine (PN P4876692) arrived just in the nick of time. While a bit pricey, it does put out 575 reliable horsepower and is equipped with all the goodies such as aluminum heads, a roller cam, and a heavy-duty block. We also liked the 625 lb-ft. of torque it puts out!
Our 500 cubic inch Mopar Performance engine (PN P4876692) arrived just in the nick of time
To feed the beast, we chose a Holley 950cfm double-pumper carburetor. It was equipped with off-road needles, seats, and vent screens to keep it from bogging while traversing uneven terrain.
To feed the beast, we chose a Holley 950cfm double-pumper carburetor. It was equipped with

Here is our engine a little closer to completion. We ordered a set of Mopar Performance pulleys and March Performance brackets. A Powermaster alternator was then used to supply the juice to the Optima batteries while a complete MSD ignition was chosen to fire the mixture. A Mean Green mini-starter turns over the beast.
Here is our engine a little closer to completion. We ordered a set of Mopar Performance pu
Keeping the big 500 cool was a priority, so we knew the stock radiator wouldn’t do. We quickly got in contact with Griffin Thermal Products, who built us a beautiful custom unit. Fabricating a custom shroud would have taken too much time, so we located a unit out of an 1989 Ford Aerostar that fit. A Flex-a-lite mechanical fan was then used to pull air.
Keeping the big 500 cool was a priority, so we knew the stock radiator wouldn’t do. W

Headers presented us with another problem. We figured on having to build a full-custom set. That takes time, which was in short supply. However, we actually found a set of Thorley Headers that were close to fitting. Since those particular headers were out of stock, Thorley supplied us with the flanges and tubes instead. A half-built set of headers allowed Tim Morse from Morse Muffler to make the final bends and welds for a perfect fit.
Headers presented us with another problem. We figured on having to build a full-custom set
Our next step was to take the custom Thorley Headers down to Gold Coast Coatings to have them coated. Besides just making them look better, the coating helps to protect them and also transfers heat better, leading to increased performance. At the same time, we dug up a rear-sump oil pan to replace the center-sump unit the 500 came with, which wasn’t going to clear the front differential
Our next step was to take the custom Thorley Headers down to Gold Coast Coatings to have t

Good Dodge transmission builders are not as prevalent as the Ford or Chevy boys, but we were lucky to come across Pro Trans who built us a 727 tranny. Dave Smith from Pro Trans equipped it with all the goodies such as a reverse manual valve body to withstand a beating. It was then equipped with a 2,500-rpm stall converter from Continental Torque Converters and a B&M deep pan that had to be modified to clear the front driveshaft.
Good Dodge transmission builders are not as prevalent as the Ford or Chevy boys, but we we
For transfer case duty, we enlisted an Advance Adapters Atlas II. Besides giving us the benefit of a 3.8:1 low range (a 4.3:1 low range is also available), it also offered the ultimate in swappability because the Atlas II can be clocked. This actually came in handy because we were able to tilt the Atlas II to help with driveshaft angles and to clear the front suspension links.
For transfer case duty, we enlisted an Advance Adapters Atlas II. Besides giving us the be

Once the Atlas II was hooked up to the back of the Pro Trans-built 727, we discovered that there was simply no room for a front driveshaft. It would have been too short for the amount of lift and wheel travel we had. Advance Adapters once again came to the rescue and overnighted us this adapter that we used as a spacer. It pushed back the transfer case about a foot, which solved our problem.
Once the Atlas II was hooked up to the back of the Pro Trans-built 727, we discovered that
Of course, ORU had to build a custom crossmember to mount the transfer case and the rest of the drivetrain. The tube on the top with the U-bolt tack welded to it was our temporary mount. The lower one is the real unit and can be seen being TIG-welded together.
Of course, ORU had to build a custom crossmember to mount the transfer case and the rest o

We wanted the truck’s exhaust note to match its appearance so we utilized two Flowmaster mufflers. Morse then fabbed up the rest of the exhaust.
We wanted the truck’s exhaust note to match its appearance so we utilized two Flowmas
N air filter to protect our engine’s internals. The crossover tube and remote reservoirs give a hint at what is in store for the next installment. Stay tuned!
N air filter to protect our engine’s internals. The crossover tube and remote reservo

Hello and welcome to the land of endless coffee, major stress, midnight part runs, and 80-hour work weeks. What's all the fuss? Well, it all started out innocently enough. We had a hankering to build one heck of a project truck and lusted after Dodge's new Dakota Quad Cab as the foundation. Once Dodge saw what we had in mind, they quickly agreed to our scheme but, unfortunately, a truck wouldn't be available until a month before our set-in-stone deadline for completion!

Sure we could have changed our minds and gone the easy route. You know, bolt on a lift, add some 33-inch tires, and call it a day--but that wasn't part of our plan. We wanted to build one of the most radical and custom project trucks ever seen. Adding to the difficulty was that, besides looking awesome, our truck also needed to be functional--actually it needed to work well. The truck would have to be able to throw mud, blast over sand dunes, and crawl over rocks with the best of them.

Big plans and big dreams are what we had in mind for the Dakota Quad Cab. The only stock components we planned to keep were the frame and the body. A live-axle conversion, front and rear Dana 60s, a mega-horsepower engine, and super-stout running gear were all in the works. Also floating around in our scheming brains was a seriously custom suspension that would have lots of wheel travel and be able to accommodate massive tires.

Our concept definitely involved lots of skilled labor and custom fabrication, so we needed a shop that we could trust to meet our deadline without sacrificing our high expectations. No small task but without hesitation we contacted Maurice Rozo at Off Road Unlimited (ORU). We had seen Maurice's work before and knew it was of the highest quality. The crew at ORU was eager to join in the madness and as soon as we took possession of our Dakota Quad Cab, it was dropped off at ORU and the cutting began.

In this months installment, we will cover the driveline of the truck. It might seem simple, but as with anything custom, there were a few dilemmas. However, there was nothing the ORU crew couldnt solve. Stay tuned for the next installment, which will cover the radical suspension build-up.

SOURCES
Griffin Thermal Products Inc. 1000 Hurricane Creek Road Piedmont, SC 29673 864-845-5000	B&M Racing & Performance Products 9142 Independence Ave. Chatsworth CA 91311 818-882-6422
Morse Muffler 1022 W. Burbank Blvd. Burbank, CA 91506 818-848-1058	Gold Coast Coatings 19 Aviador, Unit A Camarillo CA 93010 805-987-9060
March Performance 5820 Hix Rd. Westland MI 48185 734-729-9070 www.marchperformance.com	Flex-a-lite Consolidated 7213 45th St., Unit E Fife WA 98424 800-851-1510
MSD Ignition El Paso TX 9-15/-857-5200 msdignition.com	Mean Green P.O. Box 336 Laughlintown PA 15655 724-238-7319
Optima Batteries 5757 N. Green Bay Ave. Milwaukee WI 53201 414-524-1200 www.optimabatteries	Holley Tech Services P.O. Box 10360 Bowling Green, KY 42102 800-465-5391 270-781-9741 www.holley.com/
Pro Trans 42156 10th St. W., Unit D Lancaster CA 93534 661-940-7400	Thorley Headers 1561 Commerce St. Corona CA 92880 909-735-7280
K&N Engineering 1455 Citrus Ave. Riverside CA 92502 800-858-3333 www.knfilters.com	Mopar Performance Mopar.com
Advance Adapters 4320 Aerotech Center Way P.O. Box 247 Paso Robles CA 93446 805-238-7000	Flowmaster Inc
Continental Torque Converters Inc. 730 Centinela Ave. Inglewood CA 90302	Off Road Unlimited (ORU) 40 E. Palm Ave. Burbank CA CA 818-563-1208 www.offroadunlimited.com
Powermaster Electrical Systems 2401 Dutch Valley Dr. Knoxville TN 37918 865-688-5953