4Wheel & Off-Road Homepage 4-Wheel & Off-Road

P25783 Image Large

Prev Next
With all the arms and brackets in place, the suspension was cycled to check the pinion angle and to make sure nothing rubbed or hit anything. After everything was finalized, the TIG welder was fired up and used to finish up all the welds.
Dodge Dakota Quad Cab - Project 4xQuad, Part 2

 With all the arms and brackets in place, the suspension was cycled to check the pinion angle and to make sure nothing rubbed or hit anything. After everything was finalized, the TIG welder was fired up and used to finish up all the welds.  View Related Article

 

Get Adobe Flash player

Car Research Guide