4Wheel & Off-Road Homepage

P25790 Image Large

Prev Next
With the front suspension done, the crew at ORU then turned their attention to the rear. The first step was to prepare the Dana 60 that had come from Dynatrac, complete with disc brakes and a Detroit Locker and gears from Reider Racing. It was stripped of paint and then this massive mount for the upper wishbone was designed and built. Ideally, the crew at ORU wanted to fabricate a truss off of the mount, but there just wasn&#8217t enough time.
Dodge Dakota Quad Cab - Project 4xQuad, Part 2

 With the front suspension done, the crew at ORU then turned their attention to the rear. The first step was to prepare the Dana 60 that had come from Dynatrac, complete with disc brakes and a Detroit Locker and gears from Reider Racing. It was stripped of paint and then this massive mount for the upper wishbone was designed and built. Ideally, the crew at ORU wanted to fabricate a truss off of the mount, but there just wasn’t enough time.  View Related Article

 

Car Research Guide