4Wheel & Off-Road Homepage

P25794 Image Large

Prev Next
Finishing off the upper wishbone was next. The solid piece of rod and massive rod end (shown earlier attached to the rear axle) were fisheye-mounted and TIG-welded to the tubes, while bushings were used to attach the wishbone to the frame brackets.
Dodge Dakota Quad Cab - Project 4xQuad, Part 2

 Finishing off the upper wishbone was next. The solid piece of rod and massive rod end (shown earlier attached to the rear axle) were fisheye-mounted and TIG-welded to the tubes, while bushings were used to attach the wishbone to the frame brackets.  View Related Article

 

Car Research Guide