4Wheel & Off-Road Homepage 4-Wheel & Off-Road

P25796 Image Large

Prev Next
After the rear suspension was assembled, it was cycled from full bump to full droop and also articulated to make sure nothing rubbed or hit. The pinion angle of the rearend was also checked at this time. Then, ORU made a rear driveshaft and all the final welds were performed.
Dodge Dakota Quad Cab - Project 4xQuad, Part 2

 After the rear suspension was assembled, it was cycled from full bump to full droop and also articulated to make sure nothing rubbed or hit. The pinion angle of the rearend was also checked at this time. Then, ORU made a rear driveshaft and all the final welds were performed.  View Related Article

 

Get Adobe Flash player

Car Research Guide