4Wheel & Off-Road Homepage 4-Wheel & Off-Road

1983 Toyota Fj40 Rust Removal Weld

Prev Next
McSorley stitch-welds the patch panel in place with a TIG welder, being careful to work around different parts of the weld area, and not work in a continuous line, to avoid heat buildup in any one place. He used cleco clips to hold the panel in place, "but that's just me being geeky," he said. Clamps or vise-grips would work too.
Rust Removal - Rust Never Sleeps

 McSorley stitch-welds the patch panel in place with a TIG welder, being careful to work around different parts of the weld area, and not work in a continuous line, to avoid heat buildup in any one place. He used cleco clips to hold the panel in place, "but that's just me being geeky," he said. Clamps or vise-grips would work too.  View Related Article

 

Get Adobe Flash player

Car Research Guide