4Wheel & Off-Road Homepage 4-Wheel & Off-Road

Jeep Tj Wranger Measure Base Plates

Prev Next
No two YJs were built the same, so we measured everything carefully and mocked everything up before fabricating any cagework. Here, Jack Arrington is about to bolt these base plates onto the rear of the body tub. The base plate has four holes at the rear that tie into the four factory bolt holes of the rollcage, which are now incorporated. The front of the base plate has a backing plate that sandwiches the body in between using a single bolt that you'll need to drill a hole for.
Jeep Wrangler TJ Electric Soft Top Install

 No two YJs were built the same, so we measured everything carefully and mocked everything up before fabricating any cagework. Here, Jack Arrington is about to bolt these base plates onto the rear of the body tub. The base plate has four holes at the rear that tie into the four factory bolt holes of the rollcage, which are now incorporated. The front of the base plate has a backing plate that sandwiches the body in between using a single bolt that you'll need to drill a hole for.  View Related Article

 

Get Adobe Flash player

Car Research Guide