4Wheel & Off-Road Homepage

Super 88 Kit Cut Axletubes

Prev Next
The outer stub ends of the axletubes need to be cut down flush with the shoulder protruding from the axle end flange which holds the brakes. This step is critical to ensure a good, leak-free seal. We used a big cut-off wheel, but a hacksaw can be used as well.
Super 88 Axle Kit Installation - Superior Axle & Gear

 The outer stub ends of the axletubes need to be cut down flush with the shoulder protruding from the axle end flange which holds the brakes. This step is critical to ensure a good, leak-free seal. We used a big cut-off wheel, but a hacksaw can be used as well.  View Related Article

 

Car Research Guide