4Wheel & Off-Road Homepage 4-Wheel & Off-Road

2002 Chevy 2500 Sas Driveshaft

Prev  Next
2002 Chevy 2500 Sas Driveshaft

2002 Chevy 2500 Solid Axle Swap - Solidify Your Front End
The suspension was done but the drivetrain was not. The rear driveshaft was a little too short but would be OK for the trip home. The front driveshaft was totally unusable. It was way too short, was a reversed slip yoke with a fixed shaft, and the exhaust was routed in the way. On top of that the front output turns, even in 2WD on an NV246 Auto Trac transfer case! We would be able to leave the shop, but would still need new driveshafts and exhaust work done when we got home. View Related Article
2002 Chevy 2500 Sas Drivers Side Before 2002 Chevy 2500 Sas Under Belly Work 2002 Chevy 2500 Sas Pitman Arm 2002 Chevy 2500 Sas Solid Axle 2002 Chevy 2500 Sas Radius Arms 2002 Chevy 2500 Sas Brackets Weld 2002 Chevy 2500 Sas Radius Arm Bracket
2002 Chevy 2500 Sas Measure 2002 Chevy 2500 Sas Hardline Extensions 2002 Chevy 2500 Sas Track Bar Mounts Crossmember 2002 Chevy 2500 Sas Weld 2002 Chevy 2500 Sas Progressive Coils 2002 Chevy 2500 Sas Front End 2002 Chevy 2500 Sas Driveshaft
2002 Chevy 2500 Sas Suspension 2002 Chevy 2500 Sas Gear Kits 2002 Chevy 2500 Sas Driveshaft Yoke Kit 2002 Chevy 2500 Sas Driveshaft Yoke Installed 2002 Chevy 2500 Sas Fenders 2002 Chevy 2500 Sas Leaf Springs 2002 Chevy 2500 Sas Leaf Springs
2002 Chevy 2500 Sas Front View 2002 Chevy 2500 Sas Front Passenger Side 2002 Chevy 2500 Sas Front Aerial View

 

Get Adobe Flash player

Car Research Guide