4Wheel & Off-Road Homepage 4-Wheel & Off-Road
Facebook Newsletter

Dream Engine Swaps

Engines We Want To See In Your 4x4

By Fred Williams, Photography by Fred Williams

New Chevy Small-Block V-8
The Chevy small-block V-8 is probably the most boring engine to swap into anything. There are a gazillion kits, adapters, headers, harnesses, and parts to put a Chevy V-8 in whatever 4x4 you can dream of, so why did we pick this as a dream engine? Because starting in 2013 Chevy will have a brand-new V-8. The last generation of V-8 stepped ahead of its ancestors. Will this new direct-injection V-8 small-block, the Chevy Generation 5 V-8, be as popular?

Going to press we know little about the full lineup of GM V-8s coming soon, but we have seen info on the 2013 Corvette engine known as the Gen V LT1. This is not to be confused with prior LT1s, as this has a healthy 450 hp pumping from its 6.2L aluminum block and an equal rating on torque.

This engine retains the classic GM bellhousing bolt pattern, which should make adapting it to just about any transmission possible. The verdict is still out on whether the engine will be fitted with a power steering pump, or if GM will follow the herd for fuel economy with electric power-assisted steering. Either way, mounting a steering pump should not be impossible for the dedicated swapper of the future.

The direct fuel injection (same as on the EcoBoost) allows greater combustion efficiency with a more controlled fuel/air mixture, a cooler combustion chamber allowing a higher compression ratio (11.5:1), and less emissions pollutants. The required high-pressure fuel pump is driven by the new “tri-lobe” camshaft. This results in nearly 2,200 psi of fuel rail pressure to feed the eight fuel injectors.

All this technology means the aftermarket will have an uphill battle to “crack the code” of making the new direct-injection V-8 engines ready to swap in our old 4x4s, but as they have been doing so since that first Chevy V-8 debuted in 1955, we feel confident this latest version will be no different.

The new LT1 is being touted as the next Corvette engine, but by the time this issue hits the newsstand we will also have information on the new generation of small-block that will be showing up in the Silverado and Sierra pickup trucks. We expect something similar in design but with various displacements and tuned for torque. We have even heard that there may be a new direct-injection version of the dependable old 4.3L V-8 in the works.

Runner-Ups (aka Diesels)
We will get lots of complaints that none of our dream engines for swapping are diesels, so before you get angry and start rolling coal in our directions let us throw out a few honorable mentions of engines that use the green pump. However, we think one of the biggest fallacies of diesel swaps is the idea that you can swap in a diesel to save money on fuel. The fact is we doubt you’ll make back the money on your engine swap any time soon. But if you are looking for a cool, clattering, torque monster engine that usually gets good fuel economy and is fun and unique to drive, then we cannot deny that a diesel may be right for you.

First, we’ve heard lots of people extolling the virtues of the Cummins 4BT four-cylinder. We’re not convinced. These engines are heavy, loud, and rough, and we just don’t idolize them the way many think we should. Yes, they have torque and may make a good trail rig, but as a daily driver they may leave something to be desired. However, we have not had a chance to spend any time with the computer-controlled common rail four-cylinder Cummins. The common rail technology allows for much better fuel injector control, and this results in better mileage, smoother running, and generally a more refined and powerful engine. The Cummins common rail four-cylinder engines are hard to find but would be one diesel we would consider swapping into a 4x4.

The next diesel we would like to see in a 4x4 here in the states in the Toyota 4.5L V-8 diesel, also known as the 1VD-FTV. This little diesel is awesome with gobs of available torque (317 lb-ft at 1,200 rpm) and respectable power (202 hp at 3,400). We got to drive one once in a foreign Land Cruiser, but as of yet Toyota hasn’t brought one into the U.S. in a production vehicle. We can’t claim that swapping a foreign-only engine would be easy, but it would be cool.

The final dream diesel would be the Volkswagen V10 diesel offered in the Touareg SUV. This 90-degree engine displaced just 5.0L and spewed just 300-some horsepower, but it ruled with over 550 lb-ft of torque. However, this engine is a long way from that old all-mechanical diesel from ’80s and early ’90s pickups.

In fact, all of the engines in this story will require some groundbreaking electronics to make them run well outside of their original OEM applications, and unfortunately most OEMs are less than helpful when it comes to information or assistance to make them run in anything other than what the factory intended. As time goes on, fewer and fewer engine swaps will be easy, but that doesn’t mean we’ll stop dreaming and striving to make them happen. However, it may be easier to take those original vehicles and upgrade the rest of the drivetrain to make them work off-road.

SOURCES
Motus
www.motusmotorcycles.com
Cummins
Box 3005
Columbus
IN  47202
1-800-343-7357
www.cummins.com
Toyota
19001 S. Western Ave
Torrance
CA  90501
www.toyota.com
Ford Motor Co
Dearborn
MI
www.ford.com
Volkswagen
2200 Ferdinand Porsche Drive
Herndon
VA  20171
703-364-7000
www.vw.com
Chevrolet
P.O. Box 33170
Detroit
MI  48323
www.chevrolet.com
By Fred Williams
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!

*Please enter your username

*Please enter your password

*Please enter your comments
Comments:
Not Registered?Signup Here
(1024 character limit)
pigdoc
Hi Fred,

I disagree with your comment that swapping in a diesel to save money on fuel is a "fallacy".

My own truck is a real-world example. It's a 1990 first-generation 6BT Cummins in a 1977 Dodge M880 (ex-Army). The complete donor truck cost $2000. The original M880 drivetrain was a gasoline-powered 318ci-2bbl getting 14MPG. Now, I consistently get 20MPG with the Cummins. Even with the gas vs diesel fuel price differential (40-50 cents per gallon), I average about a nickel in my pocket for every mile I drive it, compared to the original equipment. In the bargain, I got a torque monster and incredible reliability. When I installed the Cummins, it had 283,000 miles on it. Now, it has 416,000 miles on it and is still going strong. That's a lot of nickels! The breakeven on the cost of the swap just in fuel-cost savings works out to about 40,000 miles of driving. The only things that have been done to the Cummins are to reseal the injector pump and rebuild the injectors. I drive it every day.
4Wheel & Off-Road