4Wheel & Off-Road Homepage

1991 Chevy Three Quater Ton Measure

Prev Next
They measured for the new TIG-welded 1 1/2 inches over 1 1/4 4130 tie rods with high-misalignment Heim joints. The idea here is that the beefier tie rods and rod ends will take the abuse of larger-than-stock tires, plus will offer sufficient flex for our less than trophy truck. Tie-rod kits are available for '99-to-present GM HD trucks, 1/2-tons, and H3s, while our earlier era '88-'98 variants were prototypes that ran about $500 complete with joints and installation.
1991 Chevy 3/4 Ton Truck - IFS Exploration

 They measured for the new TIG-welded 1 1/2 inches over 1 1/4 4130 tie rods with high-misalignment Heim joints. The idea here is that the beefier tie rods and rod ends will take the abuse of larger-than-stock tires, plus will offer sufficient flex for our less than trophy truck. Tie-rod kits are available for '99-to-present GM HD trucks, 1/2-tons, and H3s, while our earlier era '88-'98 variants were prototypes that ran about $500 complete with joints and installation.  View Related Article

 

Car Research Guide