4Wheel & Off-Road Homepage 4-Wheel & Off-Road

P91315 Image Large

Prev Next
This is the basic bent and aligned beam kit from Autofab for a Ranger. Longer coils provide 4 inches of lift, properly bent beams keep the track width near stock, and modified stock radius arms provide the proper caster. This type of kit is perhaps the easiest to install on the I-beam Fords. No drop pitman arm is required.
Two-Wheel Drive Trucks - Building Better Two-Bys

This is the basic bent and aligned beam kit from Autofab for a Ranger. Longer coils provide 4 inches of lift, properly bent beams keep the track width near stock, and modified stock radius arms provide the proper caster. This type of kit is perhaps the easiest to install on the I-beam Fords. No drop pitman arm is required.  View Related Article

 

Get Adobe Flash player